WebXL Binary Input/Output

  
The WebXL Binary I/O is a addition to the WebXL I/O group. This board functions with 16 binary inputs and outputs and no analogue points. This board can be used in conjunction with a standard I/O card, but the system can only support half the number of Binary I/O cards than standard I/O cards.

Binary Inputs
Sixteen inputs
Dry switch contact closure to ground.
Number of starts counter.
Runtime logging.
Manual override capability.

Binary Outputs
Sixteen outputs, Voltage-free type A relay contacts.
Short cycle timer on every output
Short cycle timer can be used for maximum on or minimum off time.
Number of starts counter.
Runtime logging.
5 priority levels.
Physical
The WebXL Binary Input/Output Module is 165mm long by 105mm high and 50mm Deep.
It is supplied with an Aluminium casing which can be clipped to a standard DIN Rail Mount.
Power supply
The unit is supplied via a 12V DC Connection from the WebXL Controller
External Connection
Communication to the Controller unit is via a RS485 cable connected via Phoenix Connectors

Specifications are subject to change without notice.