FacServe Unit |
 |
|
| The FacServe is an IP based network processor for use in conjunction
with a DP11 forcontrolling a network of Minicoms or Doorcoms. Previosly,
a remote DP11 had to have a PC attached top join it on to a network. Now,
with the DP22, this unit replaces the need for such an elaborate setup.
The unit communicates to the DP11 via a standard RS232 connection and
connects to the network via a standard CAT5 cable. The unit comes with
an inbuilt battery charger that operates at 6 Volt DC. This unit uses
a UDP protocol and all frontend software much be configured likewise. |
| |
Physical
The FacServe is 150 mm long by 35 mm high and 90 mm deep. |
Power supply
The unit is designed to run out of a 9 Volt AC or 12 Volt DC Power Supply
|
External Connection
|
Enclosures
All electronics and power supplies can be mounted in plastic or metal sealed
enclosures to meet environmental requirements. No fans, heat sinks or other
heat dissipation methods are required. Field wiring connections can be provided
through plugs, sockets or penetrations in the enclosure meeting expected
environmental requirements.
Enclosures will be sized to accommodate the equipment to be housed. |
Specifications are subject to change without notice.
|