WebXL Input/Output
Eight inputs
0 to 10 Volt range with 12-bit resolution.
Individual trim values on each input.
Manual override capability.
Analogue outputs
Eight outputs
0 to 10 volt range current limited to 20mA.
Maximum and minimum values for each output.
5 priority levels.
Binary Inputs
Eight inputs
Dry switch contact closure to ground.
Number of starts counter.
Runtime logging.
Manual override capability.
Binary Outputs
Eight outputs, Voltage-free type A relay contacts.
Short cycle timer on every output
Short cycle timer can be used for maximum on or minimum off time.
Number of starts counter.
Runtime logging.
5 priority levels.
The WebXL Input/Output Module is 165mm long by 105mm high and 50mm Deep.
It is supplied with an Aluminium casing which can be clipped to a standard DIN Rail Mount.
The unit is supplied via a 12V DC Connection from the WebXL Controller
Communication to the Controller unit is via a RS485 cable connected via Phoenix Connectors
Specifications are subject to change without notice.